Hazard Identification, Risk Assessment and Control (HIRAC) on Water Solid Contents Determination at Environmental Chemistry Laboratory of President University

Authors

  • Yosef Barita Sar Manik President University
  • Azka Leona Mayriza Environmental Engineering Study Program, Faculty of Engineering, President University
  • Brilian Maulani Putri Environmental Engineering Study Program, Faculty of Engineering, President University
  • Keisha Fawwaaz Environmental Engineering Study Program, Faculty of Engineering, President University
  • Khalila Kireina Huri Environmental Engineering Study Program, Faculty of Engineering, President University
  • Vira Puspita Maulidinnisa Environmental Engineering Study Program, Faculty of Engineering, President University

Keywords:

Hazard Identification, Health, Safety , Environmental, Risk Assessment, Environmental Lab

Abstract

This study conducted a Hazard Identification and Risk Assessment (HIRA) on Solid Contents Experiment that is taking place in the President University Environmental Engineering Laboratory. The main objective in this study is to identify potential hazard during experiment, to understand the risk level of hazards in the Environmental Engineering Laboratory, and to propose strategies and give improvement in laboratory practices. The methods used in this study is Hazard Identification, Risk Assessment and Control (HIRAC). As the result, the hazards that are identified in this study is slip and fall, respiratory hazard, fragile object, burn and physical injury, and electrical hazard. There are 18 hazards observed, and priority sorting is done to identify which hazard is high and medium in level and needs further caution, which turned out to be 12 medium to high hazards. The most critical hazard is pouring the water sample inti the vacuum using volumetric glass, because it has risk of slipping, falling, and handling when the water sample is spilled, and it is also a fragile object. So, this study identifies the effectiveness of HIRA method, finding steps that should be done to improve the operationsl conditions of the laboratory, and update practical education afterwards.

References

Adiputra, M. F. (2015). Risk Control Enhancement Using Safety Climate Factors For Hirarc Method In Steel Product Industry.

Aimi, N., Wahab, A., Nabilah, F., Rahiza, A., & Isa, N. (2022). Hazard Identification, Risk Assessment And Risk Control (Hirarc) On Laboratory Waste Disposal In Chemistry Laboratory. In Journal Of Academia (Vol. 10).

Dinatha Putra, R., Sukandari, B., & Saudiaz, B. (N.D.-A). Risk Management Of Occupational Safety And Health In Kri Docking Project Using Hazard Identification, Risk Assessment And Risk Control (Hirarc) Method Case Study: Pt. Pal Indonesia.

Goetsch, D. L. . (2011). Occupational Safety And Health For Technologists, Engineers, And Managers. Prentice Hall.

Henri Prasetyo, E., Kurniawan Bagian Keselamatan Dan Kesehatan Kerja, B., & Kesehatan Masyarakat, F. (2018). Analisis Hira (Hazard Identification And Risk Assessment) Pada Instansi X Di Semarang (Vol. 6). Http://Ejournal3.Undip.Ac.Id/Index.Php/Jkm

International Organization for Standardization (2018). Occupational health and safety management systems -- Requirements with guidance for use (ISO 45001:2018).

Jensen, R. C., Bird, R. L., & Nichols, B. W. (2022). Risk Assessment Matrices For Workplace Hazards: Design For Usability. International Journal Of Environmental Research And Public Health, 19(5). Https://Doi.Org/10.3390/Ijerph19052763

Kabul, E. R., & Yafi, F. (2022). Hirarc Method Approach As Analysis Tools In Formingoccupational Safety Health Management And Culture. Sosiohumaniora, 24(2), 218. Https://Doi.Org/10.24198/Sosiohumaniora.V24i2.38525

Morris, G. A., & Cannady, R. (2019). Proper use of the hierarchy of controls. Professional Safety, 64(08), 37-40.

Nalhadi, A., & Rizaal, A. (2015). Identifikasi Bahaya Dan Penilaian Risiko K3 Pada Tindakan Perawatan & Perbaikan Menggunakan Metode Hirarc (Hazard Identification And Risk Assesment Risk Control) Pada Pt. X. In Seminar Nasional Riset Terapan (Vol. 12).

Onsafelines. (N.D.). Risk Assessment Matrix 4x4. QHSE Support. https://onsafelines.com/qhse.support/topics/risk-assessment-matrix-4x4.htm

Salahuddin Araibi, A., H. Dalef, H., K. Hussein, H., Shaiful Ashrul Ishak, M., & Roslan Rahim, M. (2024). Enhancing Risk Management: Leveraging The Likelihood/Severity Matrix For Effective Risk Assessment And Mitigation In The Electrical And Electronic Sector. Al-Khwarizmi Engineering Journal, 20(3), 59–70. Https://Doi.Org/10.22153/Kej.2024.07.003

Spasojević-Brkić, V., Perišić, M., Veljković, Z., Misita, M., & Damjanović, M. (2022). Pareto Analysis In Bulldozer’s Failures And Stoppages Risk Management. Industrija, 50(2), 37–49. Https://Doi.Org/10.5937/Industrija50-41907

Syfa Urrohmah, D., & Riandadari, D. (2019). Identifikasi Bahaya Dengan Metode Hazard Identification, Risk Assessment And Risk Control (Hirarc) Dalam Upaya Memperkecil Risiko Kecelakaan Kerja Di Pt. Pal Indonesia (Vol. 08).

Ward, P. J., Blauhut, V., Bloemendaal, N., Daniell, E. J., De Ruiter, C. M., Duncan, J. M., Emberson, R., Jenkins, F. S., Kirschbaum, D., Kunz, M., Mohr, S., Muis, S., Riddell, A. G., Schäfer, A., Stanley, T., Veldkamp, I. E. T., & Hessel, W. C. (2020). Review Article: Natural Hazard Risk Assessments At The Global Scale. Natural Hazards And Earth System Sciences, 20(4), 1069–1096. Https://Doi.Org/10.5194/Nhess-20-1069-2020

Yarahmadi, R., Moridi, P., & Roumiani, Y. (N.D.). Health, Safety And Environmental Risk Management In Laboratory Fields. Http://Mjiri.Iums.Ac.Ir

Downloads

Published

2024-11-29

How to Cite

Manik, Y. B. S., Mayriza, A. L., Putri, B. M., Keisha Fawwaaz, Huri, K. K., & Maulidinnisa, V. P. (2024). Hazard Identification, Risk Assessment and Control (HIRAC) on Water Solid Contents Determination at Environmental Chemistry Laboratory of President University. Jurnal Riset Teknologi Pencegahan Pencemaran Industri, 15(2), 94–102. Retrieved from https://www.jrtppi.id/index.php/jrtppi/article/view/212